- Country of manufactureUkraine
The drying ABM-1,5 complex - complex ispolzuyetsyav lines for production: briquette, granules from broad-leaved cat-tail, pod of sunflower and drying of other bulks. Productivity 1,5t/h (depends on the entering raw materials).
1. Assignment.
The high-temperature dryer ABM-1,5 is intended for convective drying of saw dust and other refuse.
Saw dust has to possess sufficient flowability and previously to be crushed on thickness no more than to 3 mm, and longwise to the average size of 10÷30 mm. Particles up to 30 mm in size have to make not less than 80% of all weight. The maximum size of particles — 50 mm.
The dryer ABM-1,5 can be used individually complete with the equipment for granulation of saw dust or with the equipment for briquetting.
At operation of the dryer ABM-1,5 in the conditions differing from above-stated the manufacturer does not guarantee its normal work.
2. TECHNICAL CHARACTERISTIC
Type - stationary
The drive - Electric
Productivity in hour of neat job, kg/h:
when drying saw dust to humidity of 10 — 12%, at humidity of parent material, %:
50 1500
65 1200
Applied
fuel: - oven household TPB on TU 38.00150
- any liquid with kinematic viscosity at +20ºС ranging from 1,8 to 10 cSt.
when using liquid-fuel torch;
- fuel briquettes, when using open fire chamber;
- fuel granules, when using USG.
- saw dust humidity to 30%, when using USG.
Evaporation capacity, |
|
kg water/hour |
- 2100 |
Fuel consumption, m \cube |
- to 2 m \cube |
Rated capacity electro equipment, kW |
- 101,5 |
feeder |
- 7,5 |
maslostantion |
- 5,5 |
conveyor |
- 2,2 |
burning device |
- 1,5(0,75x2) |
drive of the drum |
- 7,5 |
fan |
- 55 |
the doser - lock lock |
- 2,2 |
crusher |
- 70(35x2) |
Overall dimensions, mm: |
|
length |
- 31000 |
width |
- 10700 |
height on cyclone of system of withdrawal of dry weight |
- 9400 |
total height |
- 9400 |
Weight, kg |
- 28240 |
The mass of spare parts and accessories, kg - 997
Lump of the unit, kg-29237
One driver and 1-2 workers service the dryer.
3. SHORT DESCRIPTION OF THE DESIGN
3.1. DEVICE
The dryer ABM-1,5 integrates in itself feeder of saw dust, the high-temperature dryer of drum type, crusher of hammer type and necessary auxiliary devices for performance of technological process.
The dryer consists of the following main nodes (fig. 1): feeder of sawdust, the conveyor, the burning device (depending on complete set of one or two), afterburner, the spark arrester, dryer drum, system of withdrawal of dry weight, crusher, system of branch and cooling of shredded weight, control desk.
