Vacuum Installation VTT PLASMA for drawing the strengthening coverings
- Customer pickup,
- Courier
- In detail
- BrandVTT
- Country of manufactureBelarus
- ColorWhite
- Type of coverageProtective coating
Vacuum installation for drawing the strengthening and protective and decorative coverings the refractory electrocarried - out materials: the titan, chrome, zirconium, molybdenum, the titan, aluminum, and also their connections with gases (TiN, TiC, ZrN, AlN - TiN - AlN, etc. ) a vacuum and plasma way on substrates from metal of ceramics, glass, plastic, etc.
On installation the following technological processes are realized:
- preliminary heating and outgassing of a surface of a product heaters and electronic heating;
- ionic cleaning, etching of a surface of products;
- deep plasmochemical processing of a surface of products;
- drawing by an arc method of single - layer and multilayered coverings on the basis of pure metals or their connections: nitrides, carbides, karbonitrid.
Technical characteristics.
Height of a chamber is 600 mm.
Working diameter of industrial equipment is 500 mm.
Extreme residual pressure in a chamber of 8х10 - 4 Pas.
Structure of installation.
Name | Quantity |
High - vacuum otkachny system on the basis of the diffusive pump NVDM - 400/7000 | 1 |
Low - vacuum otkachny system on the basis of the AVZ 20/ND 200 forvacuum unit | 1 |
Arc evaporators with the mm Ø 63 cathode | 2 |
Ionic source of cleaning from the worker to 400 mm | 1 |
Heaters are intra chamber | 1 |
Drive of rotation of industrial equipment | 1 |
Industrial equipment (it is made under napylyaemy products in coordination with the customer) | 1 |
The high - voltage block of shift on industrial equipment | 1 |
IK the Pyrometer for control of temperature of a product | 1 |
System of a gas - blousing with automatic maintenance of pressure, the number of channels not less than 3 | 1 |
Management of installation is possible in two options:
- semi - automatic (automatic pumping of a chamber);
- automatic.
